Ethernet Cables – Types, Speeds + Review

Ethernet Cables

When you’re looking for the best types of Ethernet cables, it can be tough to know where to start. There are a lot of options out there and each one has different features that make them good at certain tasks. In this Article, we will break down all your cable needs for your project and give you our recommendations on what type is best for your specific need.

Tips for choosing the best Ethernet cable


1) Prepare Before You Buy


Before you go out and buy your cable, make sure that you know what type of speed it needs to support. This will help narrow down the options available online for cables before shopping.

Use this as a reference when looking through different types of Ethernet cables on the internet to ensure that they meet all requirements for your network device or device is connected. The last thing that you want is to have too much bandwidth going into a single connection because no other devices can utilize the excess capacity!

2) Cable Length


Ethernet cables are available in many different lengths. When deciding which length to buy, you should consider how far apart your devices will be from one another. The longer the cable gets, the slower it is because signal degradation occurs over distance. This can result in loss of data or errors on faster Ethernet connections so make sure that you take this into consideration when purchasing a new cable for your device!

Another thing that can affect cable length is if there are any obstacles in between devices such as walls or large appliances like a fridge or microwave ovens. These objects can block Ethernet signals which means your device won’t be able to use an existing port on your router because the signal strength isn’t strong enough. You may need to run cables through tight spaces (such as under flooring) or around corners which could add more distance than necessary for good connectivity so take this into consideration while shopping!

If possible, try not to exceed 90 meters of total cable length per network switch/router; we highly recommend no longer than 70m due to potential performance issues. If needed, you can purchase Ethernet cables with different lengths to support your project needs; just ensure that they are all the same type of cable (category/speed).


For example, if one port on a switch is going into a server room that is about 100m away but has metal racks blocking the signal path then it may be necessary to use an SFP+ direct attach cable instead of a regular Cat-SX patch cord. This will allow for greater distances over fiber optic cabling while still supporting speeds up to 40Gbps! These types of network connections typically cost more than standard copper RJ45 networking cables because fiber optics require special equipment and installation since there’s no electrical current running through them.


3) Cable Type

Cable type is important to consider when buying a new Ethernet cable because it ensures that you’re getting the right equipment for your specific project. There are many different types of cables available on the market and each one has its own set of features which can help make installation easier or more difficult depending on what type of network device or cabling infrastructure exists within an existing building.

It’s best to understand how each category works before deciding which will work best with your needs:

Cat-SX – This is typically used as patch cords between network switches & routers (link) . They come in lengths up to 50 meters long but there are also other options like Cat-LXe, Cat-CXi, etc if needed for longer distances.


Cat-SXe – This is a relatively new Ethernet cable type that supports speeds up to 100Gbps and can be used for direct data center equipment connections, especially in large server rooms where it’s not possible to use copper cabling because of the distance between devices (link) . It’s typically more expensive than other networking cables but well worth it when you consider most expensive wood how much faster this connection is compared to Cat-SX or Cat-LX!


Cat-CXi – This Ethernet cable type has no RJ45 connectors on either end which make them great for connections from network switches/hubs through walls, ceilings & floors without worrying about needing extra ports or patch panels in place due to having unused pins on the cable. They’re also used in situations where it’s incredibly difficult to access network ports for maintenance or reconfiguration of equipment.


Cat-LX – This is typically found as a patch cable too but can be used for direct connections between devices like servers and switches, especially if you need extra distance; however, they are susceptible to high levels of crosstalk due to the pins being so close together on both ends (link). If your server room has metal racks or shelves, then this may not be the best choice depending on how much bandwidth needs to go through these cables! Cat-LXe cables offer better performance than standard Cat-LX wire which makes them another good option.

Cat-LH – These are very similar to Cat-SX cables but have an extra pair of wires used for sending PoE Power over Ethernet so that devices can be powered without needing a separate cable connection (link). This is especially helpful when connecting IP security cameras, wireless access points, or VoIP phones/devices which require constant power in order to function.


You May Also Like

About the Author: Saloni singh

Leave a Reply

Your email address will not be published. Required fields are marked *